Tecnología para tu próximo proyecto

TSF-PGT-OM3-LC-1.5M – PIGTAIL MM OM3 LC 0.9MM, 1.5M LSZH

TSF-PGT-OM4-LCUPC-1.5M – PIGTAIL MM OM4 LC UPC 0.9MM, 1.5M

TSF-PGT-SM-LCUPC-1.5M – PIGTAIL SM LC/UPC 1.5M 0.9MM

TSF-PP-STT-LGX – PATCH PANEL PARA SPLITTER LGX 1×8

TSF-STT-PLC-1X2-SCAPC – SPLITTER PLC 1X2 CON CONECTORES SC/APC

TSF-STT-PLC-1X4 – SPLITTER PLC 1X4 SIN CONECTORES

TSF-TEM-01 – TEMPLADOR METAL TIPO P PARA INSTALACIÓN DE FIBRA ÓPTICA DROP

Connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at both ends. The type of cable fiber and connector and the length of the patch cords can be freely specified by the customer as shown below.

MPO/MTP patch cord is a multi-fiber patch cord with fiber count of 4, 6, 8 12, 24,48. MPO/MTP patch cords use Precision molded MT ferrules, together with metal guide pins and precise housings ensuring fiber alignment when mating. MPO/MTP connector assembled to ribbon or bare ribbon connectors with push-pull latching.Supplies MPO/MTP Trunk Cable,MPO/MTP BunchCable,MPO/MTP Fanout Cable,MPO/MTP Cassette Module and MPO/MTP Patch Cord, MPO Splitter Module which are all suitable for 40G QSFP+

The CPRI patch cords are standard size for Duplex LC Connectors, widely used in FTTA, Base station, and the outdoor waterproof condition. SOPTO supplies FTTA (Fiber to the Antenna) DLC (Dual LC Connector) SM GYFJH 2G.657A patch cord for TD-SCDMA, WCDMA,CDMA2000, Wimax, 2G, 3G, 4G and 5G Base Station BBU-RRU outdoor. These products are good for CPRI application.

FTTH Drop Cable patch cords have been widely applied in FTTX. It can also be used for short distance outdoor connections. SOPTO can supply FTTH drop cable patch cords which are made from standard FTTH drop cables. The FTTH drop cable patch cords are terminated with fiber optic connectors on both ends. It is really easy and convenient to operate in FTTH Buildings; you just need to push the connector to the Adapters.

Fiber pigtail refers to a half-jumper-like connector used to connect fiber and fiber couplers. It includes a jumper connector and a length of fiber.SOPTO can supply FTTH drop cable pigtails which are made from standard FTTH drop cables. The FTTH drop cable Pigtails are terminated with fiber optic connectors on both ends. It is really easy and convenient to operate in FTTH Buildings; you just need to push the connector to the Adapters.

Sopto provides single-mode Planar Lightware Circuit Splitter (PLC type), Steel tube splitter, ABS Cassette,Plugin splitter or Tray type,Rack Mount type fiber PLC splitters

Fused Biconical Taper is to tie together with two or more optical fibers, and then fused stretching in the biconical tapering machine , and monitoring the real-time change of splitting ratio, after splitting ratio meet requirements, fused stretching is overed, one side retain a single fiber (the rest is cuted) as input port, another side is regarded as multi-channel output port.In some applications that are not very sensitive to volume and light wavelength, FBT splitter is more affordable.

Fiber Closure Vertical type box is suitable for pole-mounted installation, and is used for protective connection and fiber distribution between two or more optical cables. It is one of the commonly used equipment for user access points, and mainly completes the distribution optical cable and the household line optical cable. Sopto provide 12 cores, 24 cores, 48 cores, 72 cores, 96 cores, 144 cores, 288 cores vertical fiber closures.

Splitter Fiber Closure is suitable for pole-type, overhead type, direct-buried, pipe installation, and is used for welding and splitting between two or more cables. It is one of the commonly used devices for user access points, mainly for wiring and household cables. Outdoor connection function. The lid and base are sealed with silicone rubber; the cable inlet and outlet can be sealed with heat shrink tubing and threaded seals. Split function, maximum support 2:32.

Sopto fiber optic adapters are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection. people sometimes also name them to be mating sleeves and hybrid adapters, mating sleeves means this fibre optic adapter is used to connect the same type fiber optic connectors, while hybrid adapters are the fiber optic adapter types used to connect different kinds of fiber optic connectors. SOPTO fiber optic adapters have a name for its stability.

Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Sopto can provide female to male (plug type), Bulkhead-fixed value attenuator, in-line attenuator and variable attenuators.

Fiber fast connector is the detachable quick connection between optical fiber and optical fiber devices, it is to put the two optical fiber end face up, so that the optical output of light energy can bigger limit coupled to the receiving optical fiber, and optical link due to the intervention and the effects on the system to a relatively small.

The terminal of the cable can be used in two technologies: welding and cold bonding. The fiber cold connector is used when two pigtails are docked. The main component inside is a precision v-groove. After the two pigtails are used, the cold joints are used to realize the docking of the two pigtails. He is simpler and faster to operate, saving time than welding with a fusion splicer.

Tension Clamps are self-adjusting, designed to tension ADSS optical fiber cable on overhead telecommunication lines

The aluminum Pole Bracket manufactured from aluminum alloy with correspondingly high mechanical strength. Its unique patented design has been developed to propose a universal fitting covering all installation situations on wooden, metal or concrete poles

Suspension clamps designed to suspend ADSS round cable during construction of transmission lines, The ADSS clamp consists of plastic insert, which clamp the cable without damaging

The stainless steel banding can guarantee extended service life; and attaching under significant mechanical loads. Minimal breaking load is also different depending on the grade of steel