Tecnología para tu próximo proyecto

SOPTO’s CWDM SFP small form-factor pluggable (SFP) is a compact optical transceiver used in optical communications for both telecommunication and data communications applications at 1270-1610nm CWDM wavelengths over single-Mode Fiber (SMF). They are designed for use in Fast Ethernet, Gigabit Ethernet, 1G Fibre Channel, and SONET/SDH links, compliant with the SFP MSA. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SOPTO’s DWDM SFP is a series of optical transceiver modules operating at DWDM C-band (100GHz channel spacing) wavelengths over single-Mode Fiber (SMF). They are designed for use in Fast Ethernet, Gigabit Ethernet, 1G Fibre Channel, and SONET/SDH links, compliant with the SFP MSA. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SOPTO’s GPON SFP is a series of optical transceiver modules operating in Gigabit Passive Optical Networks (GPON). From the Central Office’s (CO) Optical Line Terminal (OLT, with GPON SFP transceiver/module) a single strand of fiber goes out to a passive optical splitter where its signal is multiplied to maximum 128 different lines in GPON. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SOPTO’s EPON SFP is a series of optical transceiver modules operating in Ethernet Passive Optical Networks (EPON). From the Central Office’s (CO) Optical Line Terminal (OLT, with EPON SFP transceiver/module) a single strand of fiber goes out to a passive optical splitter where its signal is multiplied to maximum 64 different lines in EPON. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SOPTOs 10Gbase-t or 1000base-t or 100base-t or 10/100/1000base-t Auto-negotiation copper SFP transceiver can be installed into optical SFP slots enabling an optical ethernet port (10Gbase-X/1000base-X) to be converted into a copper Ethernet port (10Gbase-t /1000base-t) either in the field or in production. copper SFP transceiver is also called RJ45 SFP transceiver. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

DAC Direct Attach Copper Cables are further divided into passive copper cable and active copper cableIn most data center, most server to server connections require 2-5 meters, while rack to rack connections are required to be connected by 8-12 meters cables.SOPTO offers a wide range of products for 0.5m to 15m lengths and in QSFP+, SFP+ form factors. The unique EEPROM technique has been used to ensure the DACs are compatible with different brands on the original switches and routers.

AOC Active Optical cables offer a flexible way to connect within racks and across adjacent racks. AOCs support farther inter-rack distances. AOCs are much thinner and lighter than DACs, which makes cabling easier. Active optical cables enable efficient system airflow, which is critical in high-density racks.SOPTO offers a wide range of products for 1m to 100m reaches, in CXP, QSFP28, QSFP, SFP28, SFP+ form factors and data rates of 10G~120G.

The media converters are designed to transmit and receive data over one optical fiber. The electrical interface will Auto-Negotiate to a 10Mbps, or 100Mbps Ethernet rate without any adjustments. The optical interface operates at a 100Mbps Ethernet rate.

The 10/100/1000Mbps POE fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 2 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras.

The 10/100/1000M media converters are designed to transmit and receive data over one optical fiber. The electrical interface will Auto-Negotiate to a 10Mbps, or 100Mbps or 1000M Ethernet rate without any adjustments. SOPTO provides two types 10/100/1000M.

Multi UTP Fiber Converter has 2～8 10/100M or 10/100/1000M UTP ports and 2～4 fiber port or 2～4 1000M SFP slots . The product is possessed of stable performance, excellent quality and reasonable price because of adopting latest IC from USA and high quality

10/100M, 10/100/1000M IEEE802.3ah OAM manageable Ethernet fiber media converter can supervise the real time situation of remote manageable fiber media converter and set the functions. With this system, the response speed of the operator is quickened.

The SPM-ITGX Series is a 10 Gigabit Ethernet copper to fiber media converter. It offers conversion technology by providing one 10GBase-T RJ-45 port and one pluggable 10GBase-X fiber SFP+ port. The open SFP+ supports a wide variety of 10GE SFP+ or XFP fiber

The 8.5G~11.7G OEO Converter (3R Repeater) is connection between fiber to fiber 10Gbps equipment function as fiber media converter, or as fiber repeater for long distance transmission. Support SDH/SONET STM-64/OC-192, 10G fiber channel，10G Ethernet etc.

The 2U-Chassis is a 19-Inch rack mountable conversion center, capable of serving up to 14 media conversion modules. 14 Slot Fiber Optic Media Converter Chassis is acceptable for the most 14 sets of 10/100M or 1000M or 10/100/1000M stand-alone media converter.

The 2U-Chassis is a 19-Inch rack mountable conversion center, capable of serving up to 16 media conversion modules. 16 Slot Fiber Optic Media Converter Chassis is acceptable for the most 16 sets of 10/100M,1000M,10/100/1000M or 10G card-type media converter.

SOPTO’s QSFP28 SR4 / QSFP28 100G IR4 / 100GBASE-LR4 QSFP28 Optical transceiver module are designed for use in 100 Gigabit Ethernet links. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 SR4/LR4 module receptacle. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

QSFP+ is a new Multi-Source Agreement (MSA) for high speed application, which provide four channels of data in one pluggable interface. Each channel is capable of transferring data at 10Gbps and supports a total of 40Gbps. The 40Gbps QSFP+ transceiver is well suited for Infiniband and 40GBASE-SR4/CSR4/IR4/ER4 applications. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SOPTO SFP28 optical transceivers are designed for use in 25GBASE data rate over multimode or single model fiber. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.SFP28 is a 25GBASE interface which has evolved from 100 Gigabit Ethernet, which is typically implemented with 4 25 Gbit/s data lanes. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

10G CWDM SFP+/XFP transceiver modules are small form factor pluggable module for serial optical data communications. It is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 14 dB is offered. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

10G BIDI SFP+ transceiver modules are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by usually using 1330(1270nm) transmitter and 1270(1330) nm receiver. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

Sopto 10G BIDI XFP transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SOPTO’s 8G FC SFP+ is a series of optical transceiver modules designed for use in 8G/16G Fiber Channel links. They are compliant with the SFP+ MSA. Digital diagnostics functions are available. The optical transceivers are RoHS compliant. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SOPTO’s 6G SFP+ is a series of optical transceiver modules designed for use in LTE/OBSAI/CPRI application. For the OBSAI application, the rates are 6.144 Gb/s, 3.072 Gb/s, 1.536 Gb/s, 0.768Gb/s. For the CPRI application, the rates are 9.830 Gb/s, 7.373Gb/s, 6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s, 1.229 Gb/s, 0.614Gb/s.They are compliant with the SFP+ MSA. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.