Tecnología para tu próximo proyecto

SOPTO Data XPON ONU series Includes Wifi or not is one of the XPON optical network unit design to meet the requirement of the broadband access network. It applies in FTTH/FTTO to provide the data, video service based on the XPON network.

Submarine Fiber cable, externally wrapped with steel or steel wire, used directly under water, requires resistance to external mechanical damage and strong water pressure.

SOPTO’s CATV XPON ONU series is fiber to the home multi service access XPON ONU. It’s based on the mature, stable, high cost performance XPON technology and has gigabit Ethernet switching, WDM and HFC technology.

CWDM system utilizes advanced thin-film-filter technology designed for use with less expensive, non-temperature-controlled lasers of MUX/DEMUX, OADM and CWDM transceivers.The CWDM Mux/Demux covers all channels from 1270nm to 1610nm in 20nm increments. Aux/Demux can increase your network capacity combined with SOPTO Multiservice Transport Device (Such as EDFA, DCM, OEO and so on), which can improve the manageability and interconnectivity of WDM Network.

CWDM Module is usually act as the internal unit of CWDM MUX/DEMUX, it is usually designed to be ABS Cassettes. They can be quick Installed in Various Boxes.1*2 CWDM filter is usually a Steel tube or a mini ABS box.

CWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple CWDM channels into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination.CWDM OADM modules are available in single-sided (East or West) and dual-sided (East and West) configurations supporting up to four wavelengths.

DWDM system supports ultra-long-haul transmission via a single fiber, coupled with DWDM MUX/DEMUX and OADM with speed protocols of up to 100G/200G per channel.The DWDM passive Mux/Demux modules deliver the benefits of a Dense Wave Division Multiplexer in a fully passive solution.SOPTO DWDM Mux/Demux are modular, scalable and are perfectly suited to transport PDH, SDH / SONET, ETHERNET services over WWDM, CWDM and DWDM in optical metro edge and access networks.

DWDM Module is usually act as the internal unit of DWDM MUX/DEMUX, it is usually designed to be a ABS Cassette.1*2 DWDM filter is usually a Steel tube or a mini ABS box.

DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C-band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination.Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance.

The EPFU is the product that with small diameter, lightweight, highly flexibility and proper stiffness, and it can be blown into the microduct of 5.0/3.5mm. The Fibers are coated with a soft acrylate resin which provides excellent dimensional and thermal stability to cushion the fibers;

Soptos video series transceivers are high performance, cost effective modules for simplex or duplex video transmission application over single mode fiber. The video 12G transceiver is designed to transmit/receive data rates from 50Mbps to 11.88Gbps and is specifically designed for robust performance. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

Soptos EPON ONU STICK SFPs are optical transceivers with a built-in 1G EPON ONU. They comply with IEEE802.3ah EPON standard and support CTC OAM. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. SOPTOs EPON ONU sticks are compatible with the Small Form Factor Multi-Sourcing Agreement (MSA) and interoperable with standard-compliant EPON OLTs. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

Soptos 16G FC SFP+ is a series of optical transceiver modules designed for use in 16G Fiber Channel links. They are compliant with the SFP+ MSA. Digital diagnostics functions are available. The optical transceivers are RoHS compliant. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

Sopto GPON OLT products includes 1，4，8，16，32 PON ports GPON OLT，the OLTs are completely meet relative standard of ITU G.984.x and FSAN.each GPON port supports the splitting ratio of 1 : 128. Sopto GPON OLT products have compact size, are convenient and flexible use, and easy deployment, which can meet the requirements of device performance and compact server room size.

SPU-GE2302W-H is an FTTH type OTT + ONU + WiFi three-in-one intelligent terminal developedby our company, which integrates ONU + WiFi intelligent gateway function and OTT intelligentset-top box function.The product realizes integration, miniaturization, low cost, high bandwidth, high cost performance, simplifies product installation and commissioning and business opening, and greatly reduces the complexity of product operation and maintenance costs.

GPON OLT SPO-GS4424-X completely meet relative standard of ITU G.984.x and FSAN, which is 1U rack-mounted device with1 USB interface, 4 uplink GE ports, 4 uplink SFP ports, 2 10-gigabit uplink ports and 4 GPON ports.

16-Port xPON + 4-Port Gigabit TP/SFP + 4-Port 1000BASE-X SFP + 4-Port 10GBASE-X SFP+ Management Module for CS-6303R and CS-6306R

1-Port GPON OLT with 2-Port 10/100/1000T + 1-Port 10G SFP+ and 1 AC + 1 DC

8-Port GPON OLT with 4-Port Gigabit TP/SFP Combo + 4-Port 1000X SFP + 4-Port 10G SFP+

GPON SFU ONT with 1GbE Port

GPON HGU with 4-Port GbE, 3000Mbps 802.11AX Wireless

GPON ONU SFP Transceiver

L2+ 24-Port 100/1000X SFP + 8-Port Shared TP + 4-Port 10G SFP+ Managed Switch

L3 16-Port 100/1000X SFP + 8-Port Gigabit TP/SFP + 4-Port 10G SFP+ Managed Ethernet Switch with 36-72V DC Redundant Power