Tecnología para tu próximo proyecto

The 8.5G~11.7G OEO Converter (3R Repeater) is connection between fiber to fiber 10Gbps equipment function as fiber media converter, or as fiber repeater for long distance transmission. Support SDH/SONET STM-64/OC-192, 10G fiber channel，10G Ethernet etc.

The 2U-Chassis is a 19-Inch rack mountable conversion center, capable of serving up to 14 media conversion modules. 14 Slot Fiber Optic Media Converter Chassis is acceptable for the most 14 sets of 10/100M or 1000M or 10/100/1000M stand-alone media converter.

The 2U-Chassis is a 19-Inch rack mountable conversion center, capable of serving up to 16 media conversion modules. 16 Slot Fiber Optic Media Converter Chassis is acceptable for the most 16 sets of 10/100M,1000M,10/100/1000M or 10G card-type media converter.

An aerial fiber optical cable is a fiber optic cable that is used on a pole. The aerial fiber optical cable laying method can utilize the original overhead open line pole to save construction costs and shorten the construction period. It is hung on the pole and is required to adapt to various natural environments. It is divided into hanging wire type, self-supporting type and non-self-supporting type.

The duct fiber optical cable is used for the outdoor cable in the access network or the customer premises network. Pipeline optical cable is generally used in urban areas. The environment in which the pipeline is laid is relatively good. Therefore, there is no special requirement for the cable sheath, and no armoring is required. The length of the laying section and the position of the splicing point must be selected before laying the pipe.

Direct Buried Outdoor Cable, externally wrapped with steel tape or steel wire, directly buried in the ground, requires resistance to external mechanical damage and soil corrosion resistance.

Air Blowing Fiber Optical Cable is a loose tube made of a high-modulus material of 250 μm single-mode or multi-mode fiber, and the casing is filled with a non-toxic and harmless waterproof compound. The center of the cable core is a non-metallic reinforcing core (FRP), and the loose tube (or filling rope) revolves around the center reinforcing core to form a compact circular core.

Indoor fiber optical cable, suitable for indoor application, is a fiber optic cable laid in a building, and is mainly used for communication equipment, computers, switches and end user equipment in buildings.

FTTH Drop Cable is commonly known as indoor hanging wiring cable. It is mostly single-core and double-core structure. It can also be made into a 4 or 8 cores structure with a cross-section of 8-shaped. The reinforcement is located at the center of the two circles. It can be made of metal or non-metal structure. The fiber is located in the geometric center of the 8-shaped shape. The fiber in the cable is made of G.657 small bending radius fiber, which can be laid at a bending radius of 20mm.

Compared to Cat5, Cat5e LAN cables performance is greatly improved, with the advantages of low attenuation, low crosstalk, and higher attenuation crosstalk ratio (ACR) and signal-to-noise ratio and smaller delay error. The Cat5e LAN cable has a maximum bandwidth of 100MHz and is suitable for Gigabit Ethernet.

The Cat6 LAN cables transmission performance is much higher than the Cat5e standard, making it ideal for Gigabit-rate network transmission applications.The Cat6 LAN cable has a transmission bandwidth of 250MHz.The Cat6a LAN cable is an improved version of Cat6 and is used primarily in 10 Gigabit networks. The Cat6a LAN cable has a transmission bandwidth of 500 MHz and a maximum transmission speed of 10 Gbps.

The Cat7 LAN cable is no longer an unshielded twisted pair cable, but a shielded twisted pair cable, which is mainly suitable for the application and development of 10 Gigabit Ethernet technology. The Cat7 LAN cable has a transmission bandwidth of at least 600 MHz and a transmission rate of 10 Gbps.

Connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at both ends. The type of cable fiber and connector and the length of the patch cords can be freely specified by the customer as shown below.

MPO/MTP patch cord is a multi-fiber patch cord with fiber count of 4, 6, 8 12, 24,48. MPO/MTP patch cords use Precision molded MT ferrules, together with metal guide pins and precise housings ensuring fiber alignment when mating. MPO/MTP connector assembled to ribbon or bare ribbon connectors with push-pull latching.Supplies MPO/MTP Trunk Cable,MPO/MTP BunchCable,MPO/MTP Fanout Cable,MPO/MTP Cassette Module and MPO/MTP Patch Cord, MPO Splitter Module which are all suitable for 40G QSFP+

The CPRI patch cords are standard size for Duplex LC Connectors, widely used in FTTA, Base station, and the outdoor waterproof condition. SOPTO supplies FTTA (Fiber to the Antenna) DLC (Dual LC Connector) SM GYFJH 2G.657A patch cord for TD-SCDMA, WCDMA,CDMA2000, Wimax, 2G, 3G, 4G and 5G Base Station BBU-RRU outdoor. These products are good for CPRI application.

FTTH Drop Cable patch cords have been widely applied in FTTX. It can also be used for short distance outdoor connections. SOPTO can supply FTTH drop cable patch cords which are made from standard FTTH drop cables. The FTTH drop cable patch cords are terminated with fiber optic connectors on both ends. It is really easy and convenient to operate in FTTH Buildings; you just need to push the connector to the Adapters.

Fiber pigtail refers to a half-jumper-like connector used to connect fiber and fiber couplers. It includes a jumper connector and a length of fiber.SOPTO can supply FTTH drop cable pigtails which are made from standard FTTH drop cables. The FTTH drop cable Pigtails are terminated with fiber optic connectors on both ends. It is really easy and convenient to operate in FTTH Buildings; you just need to push the connector to the Adapters.

Sopto provides single-mode Planar Lightware Circuit Splitter (PLC type), Steel tube splitter, ABS Cassette,Plugin splitter or Tray type,Rack Mount type fiber PLC splitters

Fused Biconical Taper is to tie together with two or more optical fibers, and then fused stretching in the biconical tapering machine , and monitoring the real-time change of splitting ratio, after splitting ratio meet requirements, fused stretching is overed, one side retain a single fiber (the rest is cuted) as input port, another side is regarded as multi-channel output port.In some applications that are not very sensitive to volume and light wavelength, FBT splitter is more affordable.

Fiber Closure Vertical type box is suitable for pole-mounted installation, and is used for protective connection and fiber distribution between two or more optical cables. It is one of the commonly used equipment for user access points, and mainly completes the distribution optical cable and the household line optical cable. Sopto provide 12 cores, 24 cores, 48 cores, 72 cores, 96 cores, 144 cores, 288 cores vertical fiber closures.

Splitter Fiber Closure is suitable for pole-type, overhead type, direct-buried, pipe installation, and is used for welding and splitting between two or more cables. It is one of the commonly used devices for user access points, mainly for wiring and household cables. Outdoor connection function. The lid and base are sealed with silicone rubber; the cable inlet and outlet can be sealed with heat shrink tubing and threaded seals. Split function, maximum support 2:32.

Sopto fiber optic adapters are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection. people sometimes also name them to be mating sleeves and hybrid adapters, mating sleeves means this fibre optic adapter is used to connect the same type fiber optic connectors, while hybrid adapters are the fiber optic adapter types used to connect different kinds of fiber optic connectors. SOPTO fiber optic adapters have a name for its stability.

Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Sopto can provide female to male (plug type), Bulkhead-fixed value attenuator, in-line attenuator and variable attenuators.

Fiber fast connector is the detachable quick connection between optical fiber and optical fiber devices, it is to put the two optical fiber end face up, so that the optical output of light energy can bigger limit coupled to the receiving optical fiber, and optical link due to the intervention and the effects on the system to a relatively small.